- This topic has 1 reply, 2 voices, and was last updated 12 years, 8 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
whats the best way to anchor arm rest moulding to a 4to 6 overhang
[armrail:1u9ifvwh][/armrail:1u9ifvwh]
Usually people just use glue and stainless steel finishing nails driven very carefully from above, then countersunk and the holes puttied and sanded.
That’s the cheap & easy way….Other methods include using a pocket hole at the seams then gluing and screwing from below.
[ph:1u9ifvwh][/ph:1u9ifvwh]or…
Using Tite-Joint fasteners at the seams, then gluing and screwing from below.
[tj:1u9ifvwh][/tj:1u9ifvwh]
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.