- This topic has 1 reply, 2 voices, and was last updated 11 years, 3 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
I shortened the bar on both sides and have two questions.
1.on the measurements list under the ht. and width columns, it sometimes puts under the width col. 3.5″. does that mean I’m supposed to lay the 2×4 flat on the ground or stand it up on its edge. 2nd, the #6 middle base support is 6″ long and fits between the #3 and #4 pieces, but it seems to be too short. I can’t figure where I’m messing up.have you saved a copy of this? I can look at it from my end.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.