- This topic has 1 reply, 2 voices, and was last updated 16 years, 5 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
The topic just about says it all, I was able to find a local place that can get New Castle by the keg. Only problem (if you can call it a problem 😆 ) is that it can only be ordered by the half-barrell (full keg). And with roughly 26.5 inches of breathing room in kegbox, its gonna be a tight squeeze. Do they make or any suggestions on procuring a “low profile” keg coupler for european “S” type kegs?
thanks for the space,
-jeff-I had the same issue with my Warsteiner keg. I used a 90 degree elbow and this gae me just enough clearance. Hope this helps. http://www.kegworks.com/product.php?pro … 829&page=1
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.