- This topic has 1 reply, 2 voices, and was last updated 16 years, 11 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Should I put a few coats of Poly on the top of my bar before I put on the envirotex. Maybe it doesn’t matter but I thought I would ask. Thanks in advance.
Might help by sealing any cracks or holes that otherwise would cause a depression in the envirotex ? It’s a lot thinner so, you would notice it dripping from somewhere sooner. Probably not a bad idea !
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.