- This topic has 1 reply, 2 voices, and was last updated 10 years, 3 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
For the L shaped bar, the plans show the main leg with the side leg as the right side. I would like it reversed with my main leg (to be approx. 8ft.) in front and the side leg (to be approx. 4ft.) on the left. So after using the re-sizing tool is it ok to simply build it as the plans state and then rotate the bar that way?
the plans are symmetrical, so you can lay it out left or right.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.