- This topic has 1 reply, 2 voices, and was last updated 18 years, 6 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
I recently purchased the plans and want to build a 10 foot straight bar. Can I use the plans for the 8 ft bar and just make the foot print of the bar two feet bigger or do I need to add another side frame to provide support for the middle of the bar?
When you finish the inside with shelves etc… You will probably add vertical sections to seperate areas also. If you use 3/4 plywood etc.. this will aslo give additional supprt if it runs from bottom to underside of the 2 x 6s. I don’t see the need to make an additional side frame.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.