- This topic has 1 reply, 2 voices, and was last updated 4 years, 6 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Noticed that cut list only shows two #45 parts to be cut. Pages 15-16 show there to be 4 #45 parts needed. Need to update the cut list and amount of 2x4s required.
Also, found that the front counter support on Section C is missing from the cut list and is not numbered in the diagram on pgs 15-16.I’ll take a look at that…thanks
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.