- This topic has 3 replies, 4 voices, and was last updated 12 years, 11 months ago by .
-
Posts
-
I’d really love to build the 8ft straight bar with keg box but i only have enough room for 7ft….will the modifications to the length hinder me in any ways??? or will they be pretty easy to manage??? again i am a novice and will be assisted by one as well so any advice will be greatly appreciated
These mods really shouldnt hinder you. I used the 8 foot bar plans (without a kegerator) and made it right around 7 feet and it wasnt a problem. I am no expert woodworker by any means but was easily able to make the changes I needed to make the bar smaller. As long as your able to work a tape measure you should be fine. There is still plenty of room for your kegerator (im planning on building one soon into my bar), you will lose a small amount of storage under the bar but it shouldnt be a big deal. The only changes that you will have to do require the tape and not following the exact cut list for the bar. shouldnt be that bad. If you have questions let me know. I have pics in the gallery if you want to see what a shorter straight bar might look like.
tank3467
We also are wanting a shorter bar without the kegelator or sink. 6′ would be adequate. Would the EHBP-03 be the plan to use?
: Think i would go for the EHBP-05 Tailgater bar instead then, that it’s a portable bar shouldent be a problem.
- You must be logged in to reply to this topic.