- This topic has 1 reply, 2 voices, and was last updated 17 years ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Greetings All,
I am getting ready to install the front panels, but I have a quick question. The plan calls for two sets of panelling or layers: inner (1/2″) and outer (?).
What should the thickness of the outer layer be – 3/4″?
Thanks,
-ShawnI just used 14MM oak board. It really depends on what you want to use, or how much money you want to spend. You want to have a lip there so that you can secure the front bar rail.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.