- This topic has 2 replies, 3 voices, and was last updated 15 years, 9 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
How do you attach the beergutter to the bar top on the tailgate bar?
The plans call for a 1×4. Should I use a 1×6 instead?I used a poplar 1×6. I attached with constuction (PL200) adhesive and the a couple of brad nails. It’s not going anywhere.
Yes, use a 1 x 6.
I changed this in the CHBD material list for part # 24.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.