- This topic has 1 reply, 2 voices, and was last updated 11 years, 10 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
having problems cutting rails to exact size and fit.
1st: the molding must be in it’s level position. this requires the same profile of plywood that will support it in its final position.
2nd: measure the inside length, then cut it slightly larger, then work down to your exact fit.
See the topic for arm rail molding – https://www.barplan.com/bpmembers/index.php/forum/54-embp-06-cove-cut-arm-rail-guide
Viewing 2 posts - 1 through 2 (of 2 total)
- The forum ‘Quick Start – PLEASE READ!’ is closed to new topics and replies.