- This topic has 1 reply, 2 voices, and was last updated 14 years ago by .
-
Posts
-
Two questions for the group:
1. I’m modifying the plans slightly to accomodate both a refrigerator as shown in the plans, and a wine fridge. The wine fridge is a bit taller as its designed to be built into the cabinetry, so it seems to me that i need to omit the lower supports and shelf that the plans call for to maintain a standard counter height. Anyone else done this?
2. I’d like to have the drawers that were shown in the rendering, but they weren’t shown in the plans. Has anyone built any with this plan that they would have photos to share?
Thanks!
As far as item #1, just do whatever mod you need to make it fit. There is no right or wrong way to do it.
As far as drawers, they are a snap to build.
An easy example would be to pull a drawer from your kitchen or bathroom and examine the construction and measurements. That’s how I did mine.
If the drawers use dovetail joints, just ignore them and use glue and an air powered Brad Nailer.
- You must be logged in to reply to this topic.